DKIM, SPF and DMARC for nonprofits: set up your domain so your emails arrive

Three DNS records that tell Gmail, Yahoo and Outlook your emails really come from you. What they do, what the big inbox providers ask, and how to check yours.

Cloud comic with nonprofit volunteers and mascots: DKIM, SPF and DMARC
DKIM, SPF and DMARC

In short: DKIM, SPF and DMARC for nonprofits are three DNS records that prove an email really comes from your domain. Gmail and Yahoo ask bulk senders to have all three, plus an easy unsubscribe. With WeGlow Mail you can send from your own domain once it is verified (DKIM, SPF, DMARC), and bounced or unsubscribed addresses are skipped automatically. Free up to 250 subscribers.

What SPF, DKIM and DMARC are

SPF lists which servers may send email for your domain, DKIM adds a signature that proves the message was not changed, and DMARC tells inbox providers what to do when a check fails. With WeGlow Mail you can send from your own domain once it is verified (DKIM, SPF, DMARC).

Think of a letter with a return address. Anyone can write your organisation's name on an envelope. These three records are how Gmail or Outlook check that the envelope really comes from you.

  • SPF is a list, published in your DNS, of the servers allowed to send email from your domain.
  • DKIM is a digital signature added to each email. The inbox provider checks it against a public key in your DNS.
  • DMARC is a rule that says what should happen when SPF and DKIM fail, and where to send reports about it.

Why they matter now: the Google and Yahoo rules

Since February 2024, Gmail and Yahoo ask bulk senders to authenticate with SPF, DKIM and DMARC and to offer one-click unsubscribe. Google counts a bulk sender from close to 5,000 messages a day to Gmail, but its guidance says all senders must meet the requirements. For a small nonprofit the safe route is to set up all three.

The figures below come from Google's email sender guidelines, its sender FAQ and Yahoo's sender best practices, read on 12 November 2026. Rules change, so check the pages themselves before you act.

What Google and Yahoo say about bulk senders
RequirementGoogleYahoo
SPF and DKIMBoth requiredBoth required
DMARCRequired; the policy can be set to noneA policy of at least p=none, and DMARC must pass
One-click unsubscribeRequired for marketing messages, plus a visible link in the messageRequired, plus a visible link in the message
Spam complaint rateKeep it below 0.30%; Google advises staying below 0.10%Keep it below 0.3%
Honouring an unsubscribeNo deadline stated on the pageWithin 2 days

Our reading: a nonprofit that sends to a few thousand supporters may be below Google's threshold, but a sender who lands in spam loses people either way. Setting up all three records costs an hour and protects every email you send after that. For the wider picture, read why nonprofit emails land in spam.

The DKIM, SPF and DMARC checklist

Before your next big send, check four things: a single SPF record that includes your sending service, DKIM records published exactly as given, a DMARC record that starts at p=none with a mailbox for reports, and a visible unsubscribe link in every email. WeGlow Mail shows whether your domain is verified.

One row per record
RecordWhat it doesWhat to check
SPF (a TXT record on your domain)Lists who may send for youOnly one SPF record per domain, and your sending service is in it
DKIM (a TXT or CNAME record the sender gives you)Signs every emailThe record is published exactly as given and the sender shows it as verified
DMARC (a TXT record on _dmarc)Sets the policy and asks for reportsStart with p=none, add a mailbox for reports, tighten later
UnsubscribeLets people leave in one stepA visible link in every email, and unsubscribed people really are skipped

Tick these four rows before your next big send. If you only do one thing this week, check that your domain has a single SPF record.

How to add the records to your domain

You add SPF, DKIM and DMARC as DNS records at the company that manages your domain. In WeGlow Mail you start from the domain settings, copy the records it shows you, and paste them into your DNS panel. Changes can take a few hours to show up.

  1. 1Find out who manages your domain's DNS. This is often your domain registrar or your website host. Ask whoever built your website if you are not sure.
  2. 2In WeGlow Mail, add your sending domain and copy the records you are shown.
  3. 3In your DNS panel, add them. Your panel may fill in your domain name automatically, so look at the final record afterwards, as Google's DMARC guide also warns.
  4. 4Wait for the records to spread, then press verify in WeGlow Mail.
  5. 5Add DMARC last. Google advises letting SPF and DKIM authenticate mail for at least 48 hours first, then publishing a TXT record at _dmarc with p=none and a rua address for reports.

Google's own pages explain the technical details: set up SPF and set up DKIM.

How to test your setup

Send a test email to yourself and to a Gmail address, as you would before any send. In Gmail, open the message, choose Show original and look for SPF, DKIM and DMARC marked as pass.

Then read the reports. The rua address in your DMARC record receives aggregate reports that show who is sending email as your domain. Google suggests a dedicated mailbox or a group for them, because the volume can be high. Keep p=none until the reports show that all your legitimate email passes, and only then move to quarantine or reject.

Common mistakes

The usual problems are two SPF records on one domain, a record pasted with the wrong name, jumping straight to a strict DMARC policy, and forgetting a second tool that also sends as you. Each one makes good email fail checks. WeGlow Mail shows whether your domain is verified.

  • Two SPF records. RFC 7208 says more than one SPF record gives a permanent error. Merge them into one.
  • Too many lookups. The same standard limits SPF to ten DNS lookups. Remove tools you no longer use.
  • Strict DMARC too early. A reject policy on day one can block your own donation receipts.
  • Another sender you forgot. The ticket shop, the donation page or a colleague's mailing tool may send in your name. List them all first.
  • A different From domain. The From address has to match the domain that passes SPF or DKIM, or DMARC fails.

What WeGlow Mail does for you

WeGlow Mail sends through Amazon SES in the EU (Ireland). You can send from your own domain once it is verified (DKIM, SPF, DMARC). Addresses that bounce or unsubscribe are skipped automatically, and every email carries an unsubscribe link with your own branding on the page.

Authentication is only one part. Consent is the other: read the GDPR guide for nonprofit newsletters, and once you are sending, read your numbers with the guide to email metrics. New to this? Start with your first newsletter.

Frequently asked questions

Do small nonprofits need SPF, DKIM and DMARC?

Google defines a bulk sender as close to 5,000 messages a day to Gmail, but it says all senders must meet its requirements for personal Gmail accounts. Even a small list benefits, because unauthenticated email is more likely to land in spam. WeGlow Mail lets you send from your own domain once it is verified.

What does DMARC p=none mean?

It means a failing email is still delivered, but the check is logged and reported to you. Google suggests starting there and tightening the policy over time. A DMARC record with p=none also meets Yahoo's minimum for bulk senders, and with WeGlow Mail you can send from your domain once it is verified.

How do I know if my emails pass SPF and DKIM?

Send a test email to a Gmail address, open it and choose Show original. SPF, DKIM and DMARC should each say pass. In WeGlow Mail you send a test to yourself first anyway, so you can check this before every important send.

Is one-click unsubscribe required?

Google says marketing and subscribed messages must support one-click unsubscribe, and Yahoo asks bulk senders for the same plus a visible link. WeGlow Mail puts an unsubscribe link in every email and skips unsubscribed addresses automatically.

How fast do DNS changes take effect?

It varies by provider, and can take from a few minutes to several hours. Wait, then press verify again instead of changing the record repeatedly. WeGlow Mail shows when your domain is verified.

Send from your own domain

Create a free account, add your domain and send your first newsletter. No card needed: every feature, up to 250 subscribers.

No card needed. The free plan has every feature, up to 250 subscribers. Pricing

Google email sender guidelines and FAQ, Yahoo sender best practices, Google DMARC guide and RFC 7208, all read on 12 November 2026. Updated: